RM35X0E
_59
Vehicle Exterior
_079256
LIGHTING (EXT)
_0384444
AUTOMATIC HIGH BEAM MAIN SWITCH
G
LIGHTING (EXT) AUTOMATIC HIGH BEAM MAIN SWITCH INSPECTION
PROCEDURE
84153
1.INSPECT AUTO HIGH BEAM SWITCH
a.
1.26,1.854 1.469,1.271
true
1.75,1.854 1.958,1.271
true
0.094,0.083 0.406,0.24
0.313,0.156
10
false
*a
1.156,1.875 1.615,2.073
0.458,0.198
10
false
+B
1.688,1.885 2.146,2.083
0.458,0.198
10
false
E
| *a | Component without harness connected
(Auto High Beam Switch) |
Inspect the automatic high beam main switch.
i.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition If the result is not as specified, replace the auto high beam switch.
5 (+B) - 2 (E) Automatic high beam main switch off 10 kΩ or higher Automatic high beam main switch on Below 1 Ω
b.
1.063,1.854 1.271,1.271
true
1.906,1.854 2.115,1.271
true
0.094,0.083 0.406,0.24
0.313,0.156
10
false
*a
0.927,1.875 1.385,2.073
0.458,0.198
10
false
ILL+
1.833,1.885 2.292,2.083
0.458,0.198
10
false
ILL-
| *a | Component without harness connected
(Auto High Beam Switch) |
Check the illumination.
i.
Apply battery voltage to the connector and check the illumination conditions.
- OK:
Battery Connection Specified Condition If the result is not as specified, replace the auto high beam switch.
Battery positive (+) → 6 (ILL+)
Battery negative (-) → 1 (ILL-)Illuminates
c.
1.396,1.854 1.604,1.271
true
1.958,1.833 1.833,1.271
true
0.094,0.083 0.406,0.24
0.313,0.156
10
false
*a
1.198,1.885 1.656,2.083
0.458,0.198
10
false
AZBI
1.906,1.885 2.365,2.083
0.458,0.198
10
false
IND+
| *a | Component without harness connected
(Auto High Beam Switch) |
Check the indicator.
i.
Apply battery voltage to the connector and check the illumination conditions.
- OK:
Battery Connection Specified Condition If the result is not as specified, replace the auto high beam switch.
Battery positive (+) → 3 (IND+)
Battery negative (-) → 4 (AZBI)Illuminates