DESCRIPTION
Whenever a lane control system DTC is stored, the forward recognition camera stores the current vehicle state as Freeze Frame Data.
CHECK FREEZE FRAME DATA
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / Lane Control / Trouble Codes.
According to the display on the GTS, select a DTC to display its freeze frame data.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | - | - | - | Cannot be used |
| Total Distance Traveled - Unit | - | - | - | Cannot be used |
| LDA Control | Lane control system control status | Prohibit or Permit | Prohibit: Control prohibited
Permit: Control permitted |
- |
| Turn Switch (Right) | Right turn signal switch status | OFF or ON | ON: Right turn signal switch on
OFF: Right turn signal switch off |
- |
| Turn Switch (Left) | Left turn signal switch status | OFF or ON | ON: Left turn signal switch on
OFF: Left turn signal switch off |
- |
| Vehicle Information (2WD/4WD) | - | - | - | Cannot be used |
| Vehicle Information (Conv/HV) | - | - | - | Cannot be used |