CUSTOMIZE LDA
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the Multi-information Display
Turn the ignition switch to ON.
Enter the following menus: Settings Tab / Settings / LDA Setup
Select the setting by referring to the table below.
Using the steering pad switches, change the customize settings.
| Display | Description | Setting | Default |
|---|---|---|---|
| Yaw Assist | Yaw assist function setting | On/Off | On |
| Alert | Method of lane departure alert | Steering vibrator/Buzzer | Steering vibrator |
| Sensitivity | Lane departure alert timing | High/Standard | High |
| Sway Warning | Vehicle sway warning function setting | On/Off | On |
| Sway Sensitivity | Sway warning sensitivity setting | High/Standard/Low | Standard |
Some of LDA functions are operable only when other functions are enabled or operating. Refer to the following table.
| LDA Main Switch | Yaw Assist | Sway Warning | |
|---|---|---|---|
|
○: Turned/Set to On |
|||
| Lane Departure Alert Function | ○ | - | - |
| Yaw Assist Function | ○ | ○ | - |
| Vehicle Sway Warning Function | - | - | ○ |