RM35X0E _54 Brake _078667 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0383093 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/o VSC OFF Switch) G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/o VSC OFF Switch)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1. WARNING LIGHT AND INDICATOR LIGHT INITIAL CHECK

a.

When the ignition switch is turned to ON, check that the ABS warning and brake warning lights come on for approximately 3 seconds.

HINT:

If the warning lights and indicator lights does not illuminate or illuminates for more than approximately 3 seconds, perform troubleshooting for the electronically controlled brake system.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o VSC OFF Switch)>HOW TO PROCEED WITH TROUBLESHOOTING