CUSTOMIZE PRE-COLLISION SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the Multi-information Display
Turn the ignition switch to ON.
Enter the following menus: Settings Tab / Settings / Pre-collision System Settings.
Select the setting by referring to the table below.
Using the steering pad switches, change the customize settings.
| Display | Description | Setting | Default |
|---|---|---|---|
| PCS | Turns the pre-collision system function on/off. | ON/OFF | ON |
| Sensitivity | Sets the pre-collision system function warning sensitivity | Late/Middle/Early | Middle |
Customizing with the GTS
The following items can be customized.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Others.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| PCS Function ON/OFF State Stored | Refer to the table below | Not Stored | $00:Not Stored,$01:Stored | Forward recognition camera |
| PCS Warning Timing State Stored 1 | Refer to the table below | Stored | $00:Not Stored,$01:Stored | Forward recognition camera |
| PCS Warning Timing State Stored 2 | Refer to the table below | Not Stored | $00:Not Stored,$01:Stored | Forward recognition camera |
| PCS Warning Timing State Stored 3 | Refer to the table below | Not Stored | $00:Not Stored,$01:Stored | Forward recognition camera |
| Customize Setting | Description | Setting |
|---|---|---|
| PCS Function ON/OFF State Stored | Function to maintain the pre-collision system on/off setting when the ignition switch is turned off and then to ON. | Not Stored: Not maintained (Pre-collision system always turns on)
Stored: Maintained |
| PCS Warning Timing State Stored 1 | Function to maintain the sensitivity setting of the pre-collision system when the power switch is turned off while the pre-collision system is on. | Not Stored: Not maintained (Setting changes to "Mid")
Stored: Maintained |
| PCS Warning Timing State Stored 2 | Function to maintain the sensitivity setting of the pre-collision system when the power switch is turned off while the pre-collision system is off. | Not Stored: Not maintained (Setting changes to "Mid")
Stored: Maintained |
| PCS Warning Timing State Stored 3 | Function to maintain the sensitivity setting of the pre-collision system when the pre-collision system is turned off and then on. | Not Stored: Not maintained (Setting changes to "Mid")
Stored: Maintained |