Use the same procedure for the RHD and LHD vehicles.
The procedure listed below is for the LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
84233
1.INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the "TORX" screw.
Connect the connector.
62414A
2.INSTALL LOWER CENTER PILLAR GARNISH LH
Use the same procedure described for the RH side.
74680
3.INSTALL PILLAR ASSIST GRIP ASSEMBLY B (w/ Assist Grip)
74617A
4.INSTALL ASSIST GRIP PLUG (w/ Assist Grip)
73220
5.INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH (FLOOR ANCHOR)
73233
6.INSTALL OUTER LAP BELT ANCHOR COVER
67872A
7.INSTALL NO. 1 SLIDE DOOR WEATHERSTRIP LH
Use the same procedure described for the RH side.
67918E
8.INSTALL REAR DOOR SCUFF PLATE LH
Use the same procedure described for the RH side.
62312B
9.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
67914B
10.INSTALL FRONT DOOR SCUFF PLATE LH
67912A
11.INSTALL FRONT DOOR OUTSIDE SCUFF PLATE LH