RM35X0E
_51
Engine / Hybrid System
_078720
7GR-FKS ENGINE CONTROL
_0381920
MASS AIR FLOW METER
A
7GR-FKS ENGINE CONTROL MASS AIR FLOW METER INSTALLATION
PROCEDURE
22204
1.INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY
- HINT:
-
Perform "Inspection After Repair" after replacing the intake mass air flow meter sub-assembly.
a.
Install the intake mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.
- Torque:
- 1.0 N*m (10 kgf*cm, 9 in.*lbf)
- NOTICE:
- ·
If the intake mass air flow meter sub-assembly has been struck or dropped, replace it.
·If reusing the intake mass air flow meter sub-assembly, be sure to inspect the O-ring.
·Make sure that the O-ring is not cracked or moved out of place when installing the intake mass air flow meter sub-assembly.
b.
Connect the intake mass air flow meter sub-assembly connector.
2.PERFORM INITIALIZATION
a.
Perform "Inspection After Repair" after replacing the intake mass air flow meter sub-assembly.