RM35X0E _51 Engine / Hybrid System _078720 7GR-FKS ENGINE CONTROL _0381912 CAMSHAFT OIL CONTROL VALVE(for Exhaust Side of Bank 2) A

7GR-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE(for Exhaust Side of Bank 2)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CAMSHAFT TIMING GEAR BOLT

a.
A352541

Apply engine oil to the areas of the camshaft timing gear bolt shown in the illustration.


b.

Temporarily install the camshaft timing gear bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing gear bolt has been struck or dropped, replace it.

·

If there is any abnormal resistance when temporarily installing the camshaft timing gear bolt, loosen it and make sure that the No. 1 cylinder is at TDC/compression, and then temporarily install the camshaft timing gear bolt again.



HINT:

Make sure that the flange part of the camshaft timing gear bolt is directly contacting the camshaft timing gear assembly.



c.

Loosen the camshaft timing gear bolt 60 to 180°.


d.
A443181N01
1.896,1.781 2.479,1.781 true 2.125,1.76 2.125,1.49 true 2.531,1.698 2.948,1.906 0.417,0.208 10 true SST

Using SST, hold the crankshaft pulley assembly.

SST
09213-54015  (91651-60855)
09330-00021  


e.

Tighten the camshaft timing gear bolt.

Torque:
95 N*m (969 kgf*cm, 70 ft.*lbf)

NOTICE:

Do not use an impact wrench.



Hide 15370 2.INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2)

Click hereEngine / Hybrid System>7GR-FKS (ENGINE CONTROL)>CAMSHAFT OIL CONTROL SOLENOID>INSTALLATION