RM35X0E _54 Brake _078668 BRAKE SYSTEM (OTHER) _0381540 VACUUM WARNING SWITCH(for RHD) G

BRAKE SYSTEM (OTHER) VACUUM WARNING SWITCH(for RHD) ON-VEHICLE INSPECTION

PROCEDURE

Hide Display 1.INSPECT BRAKE FLUID LEVEL IN RESERVOIR

Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID>ON-VEHICLE INSPECTION201902,999999,_54,_078668,_0382364,RM100000001G4EI_03_0007,

Hide Display 44610 2.INSPECT BRAKE BOOSTER ASSEMBLY

Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE BOOSTER (for RHD)>ON-VEHICLE INSPECTION201902,999999,_54,_078668,_0381539,RM100000001G0L6,

Hide Display 83390 3.INSPECT VACUUM WARNING SWITCH ASSEMBLY

Start the engine and stop it after 1 or 2 minutes.

Disconnect the connector from the vacuum warning switch assembly.

Measure the resistance of the vacuum warning switch assembly.

Standard Resistance:: 10 kΩ or higher

With the engine stopped, depress the brake pedal several times to release vacuum from the brake booster assembly, and measure the resistance of the vacuum warning switch assembly.

Standard Resistance:: Below 1 Ω

Connect the connector to the vacuum warning switch assembly.