RM35X0E _54 Brake _078667 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0381529 VSC OFF SWITCH G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VSC OFF SWITCH  INSPECTION  


PROCEDURE

Hide 84988L 1.INSPECT VSC OFF SWITCH

a.
C374263C01
1.135,1.865 1.396,1.5 true 2.406,1.865 2.073,1.5 true 0.146,0.146 0.458,0.302 0.313,0.156 10 false *a 1.063,1.865 1.219,2.063 0.156,0.198 10 false + 2.427,1.885 2.583,2.083 0.156,0.198 10 false E
*a Component without harness connected
(VSC OFF switch)


Make sure that there is no looseness at the locking part and the connecting part of the connector.

OK:

The connector is securely connected.



b.

Disconnect the VSC OFF switch connector.


c.

Check both the connector case and the terminal for deformation and corrosion.

OK:

No deformation or corrosion.



d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
5 (+) - 2 (E) Switch pushed Below 1 Ω
5 (+) - 2 (E) Switch not pushed 10 kΩ or higher


If the result is not as specified, replace the VSC OFF switch.