RM35X0E _V1 General _078672 MAINTENANCE _0381520 REAR BRAKE FLEXIBLE HOSE(for Rear Disc Brake without Electric Parking Brake) A

MAINTENANCE  REAR BRAKE FLEXIBLE HOSE(for Rear Disc Brake without Electric Parking Brake)  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

Because the left and right rear flexible hoses are not interchangeable, verify the part number when installing the rear flexible hoses.

·

When reusing the rear flexible hoses, use the identification marks created during removal to install each rear flexible hose to its original position.



HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 47319F 1.INSTALL REAR FLEXIBLE HOSE

NOTICE:

When installing the rear flexible hose, minimize twisting of the hose.


a.
C414627C01
1.688,1.885 1.417,1.5 true 0.688,0.688 0.552,0.438 true 1.271,1.333 1.583,1.531 0.313,0.198 10 false *a 1.438,0.198 1.75,0.396 0.313,0.198 10 false *b 0.438,0.219 0.75,0.417 0.313,0.198 10 false *c
*a Identification Mark
*b Torque Wrench Fulcrum Length
*c Union Nut Wrench


Install the rear flexible hose with a new clip.

NOTICE:
·

Install the clip as far as it will go.

·

When installing the rear flexible hose, face the identification mark to the upper side of the vehicle.




b.

Using a union nut wrench, connect the brake line to the rear flexible hose while holding the rear flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

NOTICE:
·

Do not kink or damage the brake line.

·

Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting parts.



HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.866 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)):

13.4 N*m (137 kgf*cm, 10 ft.*lbf)




c.

Install the rear flexible hose to the rear disc brake cylinder assembly with a new union bolt and a new gasket.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)

NOTICE:

Install the rear flexible hose lock securely into the lock hole in the rear disc brake cylinder assembly.