RM35X0E _V1 General _078672 MAINTENANCE _0381520 REAR BRAKE FLEXIBLE HOSE(for Rear Disc Brake) A

MAINTENANCE REAR BRAKE FLEXIBLE HOSE(for Rear Disc Brake) REMOVAL

CAUTION / NOTICE / HINT

NOTICE:: ·

If both left and right rear flexible hoses are disconnected at the same time, be sure to place an identification mark on each hose to indicate its installation position.

HINT:: ·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.

Hide Display 1.REMOVE REAR WHEEL

Hide Display 2.DRAIN BRAKE FLUID

NOTICE:: If brake fluid leaks onto any painted surface, immediately wash it off.

Hide Display 47319F 3.REMOVE REAR FLEXIBLE HOSE

Remove the union bolt and gasket, and disconnect the rear flexible hose from the rear disc brake cylinder assembly.

Using a union nut wrench, disconnect the brake line while holding the rear flexible hose with a wrench.

NOTICE:: ·

Do not kink or damage the brake line.

·

Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting parts.

Remove the clip and rear flexible hose from the vehicle body.