Use the same procedure for the RH and LH sides.
The procedure listed below is for the RH side.
81080J
1.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
Check the illumination.
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly) |
Apply battery voltage to the connector and check the illumination conditions.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1 (B)
Battery negative (-) → 2 (E) |
Illuminates |
If the result is not as specified, replace the rear door scuff plate RH.