Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
84233
1.INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
| *a | Component without harness connected
(Front Door Courtesy Light Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Connection |
|---|---|---|
| 1 - Switch body | Pushed | 10 kΩ or higher |
| Not pushed | Below 1 Ω |
Connect the negative (-) tester lead near the bolt hole.
If the result is not as specified, replace the front door courtesy light switch assembly.