CUSTOMIZE METER / GAUGE SYSTEM
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Warning or Display.
Select the setting by referring to the table below.
Be sure to record the current value before customizing.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Lane Change Flashing Times Adjust | Function to change the lane change flashing time | 3 | $00:OFF,$01:3,$02:4,$03:5,$04:6,$05:7 | Combination meter assembly |
| Flasher Sound Volume Adjust | Function to change the flasher sound volume | Medium | $02:Large,$00:Medium,$01:Small | Combination meter assembly |
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| ODO Display Time After IG OFF Adjust | Function to change the ODO display time after the ignition switch is turned off | 30s | $00:30s,$01:60s,$02:600s,$03:OFF | Combination meter assembly |
| ECO Drive Indicator Zone Display Function (Meter) | Function to change the ECO drive indicator zone display | ON | $00:OFF,$01:ON | Combination meter assembly |