CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM
Customize using GTS
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Ultrasonic Sensor (Front Corner) Detection Range | Sets the onset range of the ultrasonic sensor (front corner). | Far | $00:Close,$01:Far | Clearance warning ECU assembly |
| Ultrasonic Sensor (Rear Corner) Detection Range | Sets the onset range of the ultrasonic sensor (rear corner). | Far | $00:Close,$01:Far | Clearance warning ECU assembly |
| PKSA (O) Forward Detection Image Display | Sets whether to show the sonar detection status on the display, when an obstacle is detected while driving the vehicle forward. | Display | $01:Display,$03:Hide | Clearance warning ECU assembly |
| Ultrasonic Sensor Actuation (Shift N) | Turns ultrasonic sensor operation ON/OFF when shift position is in N. | ON | $00:OFF,$01:ON | Clearance warning ECU assembly |
| PKSA (O) Switch State Stored | Sets whether to store the main switch status (ON/OFF). | Stored | $00:Not Stored,$01:Stored | Clearance warning ECU assembly |
| PKSA (O) Judgment of Obstacle on Course | Sets whether to enable auto mute in the following situation, among the auto mute conditions for the auto mute function. (Obstacle is not in path of own vehicle.) | Valid | $00:Valid,$01:Invalid | Clearance warning ECU assembly |
| PKSA (O) Auto Mute Function | Sets the availability of the auto mute function. | ON | $00:ON,$01:OFF | Clearance warning ECU assembly |
| PKSA (O) Image Display when Away from the Obstacle | Sets whether to show the sonar detection status on the display when the vehicle moves away from the obstacle. | Display | $00:Hide,$01:Display | Clearance warning ECU assembly |
| Voice Guidance Function | Turns the speech guidance function ON/OFF. | ON | $00:OFF,$01:ON | Clearance warning ECU assembly |
| Clearance Warning Buzzer Volume | Sets the volume of the clearance warning buzzer*1 | Volume2 | $01:Volume1,$02:Volume2,$03:Volume3 | Clearance warning ECU assembly |
| Clearance Warning Buzzer Surround | Sets the surround of the clearance warning buzzer.*1 | ON | $00:OFF,$01:ON | Clearance warning ECU assembly |
| PKSA (O) Main Switch | Switches the PKSA (O) function on and off.*1 | ON | $00:OFF,$01:ON | Clearance warning ECU assembly |
*1: Customize settings may not be able to be selected from "Clearance Warning" if the vehicle recognizes driver 1, 2 or 3 with the My Settings function. In that case, change the settings from "My Settings".