SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  DATA LIST / ACTIVE TEST  

DATA LIST

CAUTION:

Never measure the resistance of the SRS parts because current from the tester may cause the SRS parts to deploy.

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.