PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
When disconnecting and reconnecting the auxiliary battery.
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
PRECAUTION FOR POWER DISTRIBUTION BOX ASSEMBLY
Do not remove or install the power distribution box assembly with the negative (-) auxiliary battery terminal connected.
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Make sure that the power distribution box assembly is not exposed to water, as it is not waterproof.
Some loads are connected to circuits with dedicated overcurrent protection. Therefore, do not use parts other than those specified for the vehicle.
When replacing the power distribution box assembly, the system may not operate normally if the same part number is not used.
Check that systems are operating normally before proceeding with troubleshooting.