RM38T0EC _57 Power Source / Network _145000 M20F-FXS, M20G-FXS BATTERY / CHARGING _0605077 CHARGING SYSTEM D

M20F-FXS, M20G-FXS BATTERY / CHARGING  CHARGING SYSTEM  DIAGNOSIS SYSTEM  


DLC3 (Data Link Connector 3)


a.

Check the DLC3.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>GENERAL INFORMATION



AUXILIARY BATTERY VOLTAGE


Standard Voltage:
Switch Condition Specified Condition
Ignition switch ON 11 to 14 V


If the voltage is below 11 V, replace or recharge the auxiliary battery.

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>BEFORE DISCONNECTING BATTERY