RM38T0EC
_V1
General
_104399
SPECIFICATIONS
_0604294
M20F-FXS, M20G-FXS FUEL
F
SPECIFICATIONS M20F-FXS, M20G-FXS FUEL SERVICE DATA
FUEL SYSTEM
| Fuel pressure
|
Standard fuel pressure
|
300 to 640 kPa (3.1 to 6.5 kgf/cm2, 44 to 93 psi)
|
| Standard fuel pressure (high pressure side)
|
3000 to 25000 kPag at 2500 rpm (shift lever in P, engine warmed up, A/C off and injection mode direct)
|
| Fuel pressure: for 5 minutes after engine has stopped
|
Standard fuel pressure
|
98 kPa (1.0 kgf/cm2, 14.2 psi) or more
|
FUEL INJECTOR (for Port Injection)
| Port fuel injector assembly
|
Standard resistance
|
11.6 to 12.4 Ω at 20°C (68°F)
|
| Standard injection volume
|
67 to 81 cc (4.1 to 4.9 cu.in.) per 15 seconds
|
| Difference between each port fuel injector assembly
|
14 cc (0.9 cu.in.) or less
|
| Standard fuel drop
|
1 drop or less per 20 minutes
|
FUEL INJECTOR (for Direct Injection)
| Direct fuel injector assembly
|
Standard resistance
|
1.34 to 1.64 Ω at 20°C (68°F)
|
FUEL PRESSURE SENSOR
| No. 2 fuel pressure sensor
|
Standard voltage
|
2 (PFL) - 3 (E2)
|
Approximately 0.56 to 0.94 V
|
FUEL PRESSURE SENSOR (for High Pressure)
| Fuel pressure sensor
|
Standard voltage
|
3 (PR) - 2 (E2)
|
Approximately 0.4 to 0.6 V
|
FUEL PUMP
| Fuel pump
|
Standard resistance
|
U - V
|
0.05 to 3.0 Ω
|
| V - W
|
0.05 to 3.0 Ω
|
| U - W
|
0.05 to 3.0 Ω
|
FUEL PUMP (for High Pressure)
| Fuel pump assembly
|
Standard resistance
|
0.45 to 0.55 Ω at 20°C (68°F)
|
FUEL SENDER GAUGE ASSEMBLY
| Fuel sender gauge assembly
|
Standard voltage
|
4.255 to 4.605 V (Float level F)
|
| 0.345 to 4.605 V (Float level F to E)
|
| 0.345 to 0.695 V (Float level E)
|