☰ Toyota Frontlander☰ فهرستEngine / Hybrid System › HYBRID / BATTERY CONTROL › ACCELERATOR PEDAL SENSOR
RM38T0EC
_51
Engine / Hybrid System
_144957
HYBRID / BATTERY CONTROL
_0604239
ACCELERATOR PEDAL SENSOR
G
HYBRID / BATTERY CONTROL ACCELERATOR PEDAL SENSOR ON-VEHICLE INSPECTION
PROCEDURE
78110K
1.INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY
a.
Connect the GTS to the DLC3.
b.
Turn the power switch on (IG).
c.
Turn the GTS on.
d.
Enter the following menus: Powertrain / Hybrid Control / Data List / Accelerator Position Sensor No. 1 Voltage %, Accelerator Position Sensor No. 2 Voltage %.
- Powertrain > Hybrid Control > Data List
-
Tester Display Accelerator Position Sensor No.1 Voltage % Accelerator Position Sensor No.2 Voltage % - 50003 397 23,24
e.
Read the Data List.
- Result:
Tester Display Accelerator Pedal Condition Specified Condition Accelerator Position Sensor No. 1 Voltage % Not depressed 10 to 22% Fully depressed 52 to 90% Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively Accelerator Position Sensor No. 2 Voltage % Not depressed 24 to 40% Fully depressed 68 to 99% Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively