M20F-FXS, M20G-FXS ENGINE CONTROL ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION
CAUTION / NOTICE / HINT
| Procedure | Part Name Code | 
|
|
|
|
|---|---|---|---|---|---|
| 1 | ENGINE COOLANT TEMPERATURE SENSOR | 89422A | ( 202307,999999,_51,_144956,_0604224,RM100000002BTIS_01_0026,)
|
- | - |
| 2 | INVERTER WITH CONVERTER ASSEMBLY | G9200 | - | - | - |
| 3 | ADD ENGINE COOLANT | - | - | (202307,999999,_51,_144956,_0604224,RM100000002BTIS_01_0035,)
|
- |
| 4 | INSPECT FOR COOLANT LEAK | - | (202307,999999,_51,_144956,_0604224,RM100000002BTIS_01_0034,)
|
- | - |
| 5 | PERFORM INITIALIZATION | - | - | - | (202307,999999,_51,_144956,_0604224,RM100000002BTIS_01_0033,)
|
| ● | Non-reusable part | - | - |
PROCEDURE
89422A
1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR
|
|
|
Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.
Install the engine coolant temperature sensor to the water outlet with a new clip.
- NOTICE:
- ·
If the engine coolant temperature sensor has been struck or dropped, replace it.
·If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.
·Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.
Connect the engine coolant temperature sensor connector.
G9200
2.INSTALL INVERTER WITH CONVERTER ASSEMBLY
3.ADD ENGINE COOLANT (for Engine)
4.INSPECT FOR COOLANT LEAK (for Engine)
5.PERFORM INITIALIZATION
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.