If none of the switch indicators on the air conditioning control assembly illuminate, the following factors may be the cause.
| Symptom | Factor |
|---|---|
| A/C switch indicator does not illuminate | ·
Air conditioning amplifier assembly malfunction ·
Air conditioning control assembly malfunction ·
A/C switch malfunction ·
A/C switch indicator malfunction (including when indicator turned off without switch operation) ·
Servo motor initialization (incomplete) ·
Mechanical locking of damper and damper link ·
Refrigerant pressure is extremely low ·
Low detected ambient temperature (including thermistor assembly malfunction) |
Check the malfunction status of switch indicators on the air conditioning control assembly.
| Result | Proceed to |
|---|---|
| Indicators are not always illuminated | A |
| A/C switch indicators are not illuminated only immediately after starting the hybrid control system | B |
A
B
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Ambient Temperature Sensor | Thermistor assembly | Min.: -327.68°C (-557.82°F)
Max.: 327.67°C (-621.81°F) |
Actual ambient temperature displayed | Ambient temperature sensor (thermistor assembly) circuit malfunction |
| Tester Display |
|---|
| Ambient Temperature Sensor |
The value displayed is 0°C (32°F) or higher.
| Proceed to |
|---|
| OK |
| NG |
OK
NG