RM38T0EC
_58
Vehicle Interior
_112289
METER / GAUGE / DISPLAY
_0601632
TRIP SWITCH
G
METER / GAUGE / DISPLAY TRIP SWITCH INSPECTION
PROCEDURE
84975
1.INSPECT TRIP SWITCH (for TFTM Made)
a.
Check the resistance.
i.
1.5,0.167 1.917,0.417
0.417,0.25
1.125,1.875 1.375,1.292
true
2.26,1.875 2.01,1.292
true
0.115,0.094 0.427,0.25
0.313,0.156
10
false
*a
0.99,1.938 1.448,2.135
0.458,0.198
10
false
A/B
2.26,1.938 2.719,2.135
0.458,0.198
10
false
E
1.594,0.208 2.052,0.406
0.458,0.198
10
false
I284
| *a | Component without harness connected
(Trip Switch) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition I284-5 (A/B) - I284-2 (E) ODO TRIP switch pressed Below 1 Ω I284-5 (A/B) - I284-2 (E) ODO TRIP switch not pressed 10 kΩ or higher
ii.
If the result is not as specified, replace the trip switch.
b.
Check the illumination.
i.
1.5,0.167 1.917,0.417
0.417,0.25
0.917,1.792 1.167,1.292
true
2.479,1.792 2.229,1.292
true
0.167,0.177 0.479,0.333
0.313,0.156
10
false
*a
0.656,1.823 1.271,2.021
0.615,0.198
10
false
ILL+
2.531,1.813 3.146,2.01
0.615,0.198
10
false
ILL-
1.594,0.219 2.052,0.417
0.458,0.198
10
false
I284
| *a | Component without harness connected
(Trip Switch) |
Apply auxiliary battery voltage to the trip switch and check that the switch illuminates.
- OK:
Tester Connection Specified Condition I284-6 (ILL+) - Auxiliary battery positive (+)
I284-1 (ILL-) - Auxiliary battery negative (-)Switch illumination illuminates
ii.
If the result in not as specified, replace the tripe switch.
84975
2.INSPECT TRIP SWITCH (for GTMC Made)
a.
Check the resistance.
i.
1.5,0.167 1.917,0.417
0.417,0.25
1.125,1.875 1.375,1.292
true
2.26,1.875 2.01,1.292
true
0.115,0.094 0.427,0.25
0.313,0.156
10
false
*a
0.99,1.938 1.448,2.135
0.458,0.198
10
false
A/B
2.26,1.938 2.719,2.135
0.458,0.198
10
false
E
1.594,0.208 2.052,0.406
0.458,0.198
10
false
I282
| *a | Component without harness connected
(Trip Switch) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition I282-5 (A/B) - I282-2 (E) ODO TRIP switch pressed Below 1 Ω I282-5 (A/B) - I282-2 (E) ODO TRIP switch not pressed 10 kΩ or higher
ii.
If the result is not as specified, replace the trip switch.
b.
Check the illumination.
i.
1.5,0.167 1.917,0.417
0.417,0.25
0.917,1.792 1.167,1.292
true
2.479,1.792 2.229,1.292
true
0.167,0.177 0.479,0.333
0.313,0.156
10
false
*a
0.656,1.823 1.271,2.021
0.615,0.198
10
false
ILL+
2.531,1.813 3.146,2.01
0.615,0.198
10
false
ILL-
1.594,0.219 2.052,0.417
0.458,0.198
10
false
I282
| *a | Component without harness connected
(Trip Switch) |
Apply auxiliary battery voltage to the trip switch and check that the switch illuminates.
- OK:
Tester Connection Specified Condition I282-6 (ILL+) - Auxiliary battery positive (+)
I282-1 (ILL-) - Auxiliary battery negative (-)Switch illumination illuminates
ii.
If the result in not as specified, replace the tripe switch.