ALL READINESS
With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.
You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.
Clear the DTCs even if no DTCs are stored.
Turn the ignition switch off and wait for 2 minutes or more.
Turn the ignition switch to ON.
Perform the DTC judgment driving pattern to run the DTC judgment.
| Tester Display |
|---|
| All Readiness |
Input the DTCs to be confirmed.
Check the DTC judgment result.
| GTS Display | Description |
|---|---|
|
If the judgment result shows Incomplete, perform the DTC confirmation driving pattern again. |
|
| Normal | ·
DTC judgment completed ·
System normal |
| Abnormal | ·
DTC judgment completed ·
System abnormal |
| Incomplete | ·
DTC judgment not completed ·
Perform the driving pattern |
CLEAR IMAGE INFORMATION
This utility is used to clear the image information stored in the parking assist ECU.
Perform "Image Information Clear " according to the display on the GTS.
| Tester Display |
|---|
| Image Information Clear |
IMAGE RECORDING SETTING
This utility is used to enable/disable image recording.
Perform "Image Recording Setting" according to the display on the GTS.
| Tester Display |
|---|
| Image Record Setting |