DATA LIST
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Door Courtesy Switch Status | Front door courtesy light switch assembly (for RH) signal | Close or Open | Close: Front door RH closed
Open: Front door RH open |
- |
| FL Door Courtesy Switch Status | Front door courtesy light switch assembly (for LH) signal | Close or Open | Close: Front door LH closed
Open: Front door LH open |
- |
| IGR Power | Ignition switch status | OFF or ON | OFF: Ignition switch off
ON: Ignition switch ON |
"OFF" is displayed even though the ignition switch is ACC. |
| Roof OPEN Switch | OPEN switch signal | OFF or ON | OFF: OPEN switch not pressed
ON: OPEN switch pressed |
- |
| Roof CLOSE Switch | CLOSE switch signal | OFF or ON | OFF: CLOSE switch not pressed
ON: CLOSE switch pressed |
- |
| Roof UP Switch | UP switch signal | OFF or ON | OFF: UP switch not pressed
ON: UP switch pressed |
- |
| Roof DOWN Switch | DOWN switch signal | OFF or ON | OFF: DOWN switch not pressed
ON: DOWN switch pressed |
- |
| Roof Initialize Status | Sliding roof initialize status | Initialized or Uninitialized | Display initialization status | - |
| Communication Slide Roof | Connection status between sliding roof ECU (sliding roof drive gear sub-assembly) and main body ECU (multiplex network body ECU) | STOP or OK | STOP: Communication stopped
OK: Normal communication |
- |
| Door Key P/W Up Function | Key-linked power windows and sliding roof close function | Disable or Enable | Customize setting displayed | - |
| Door Key P/W Down Function | Key-linked power windows and sliding roof open function | Disable or Enable | Customize setting displayed | - |
| P/W Up W/ Transmit Function | Wireless transmitter-linked power windows and sliding roof close function | Disable or Enable | Customize setting displayed | w/ Wireless Transmitter-linked Power Windows and Sliding Roof Close Function |
| P/W Down W/ Transmit Function | Wireless transmitter-linked power windows and sliding roof open function | Disable or Enable | Customize setting displayed | - |
| Slide Roof Open Warning Function | Sliding roof open warning function | Disable or Enable | Customize setting displayed | - |
| Roof Switch Auto Operation Setting | Sliding roof auto operation function | Disable or Enable | Customize setting displayed | - |
ACTIVE TEST
Using the GTS, perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Sliding Roof Open | Sliding roof open activate | OFF/ON | - |
| Sliding Roof Close | Sliding roof close activate | OFF/ON | - |