RM38T0EC _56 Audio / Visual / Telematics _115231 TELEMATICS _0512170 TELEMATICS SYSTEM(for TOYOTA Connect) J

TELEMATICS  TELEMATICS SYSTEM(for TOYOTA Connect)  Telematics Service cannot be Used  


PROCEDURE

1.CHECK FOR SERVICE FLAG
a.

Using the GTS to perform the "Data List".

Body Electrical > Telematics > Data List
Tester Display
Telematics Activation Status
50003 459 38

b.

According to the display on the GTS, read the "Data List".

Body Electrical > Telematics > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Telematics Activation Status DCM activation status Shipping or Active Shipping: Not activated
Active: Activated 		-

c.

Check if the flag information indicates "Active" as shown in the illustration.

Result:
Result Proceed to
"Shipping" is indicated. A
"Active" is indicated. B




A

2.PERFORM OPERATION (CONTRACT PROCEDURE)

B

3.PERFORM OPERATION (UPDATE DATA TABLE)
2.PERFORM OPERATION (CONTRACT PROCEDURE)
a.

Perform the contract procedure again.

i.

Perform the contract procedure again.

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for TOYOTA Connect)>REGISTRATION


ii.

Check for the problem symptom.



Result:
Result Proceed to
System returns to normal. A
System does not return to normal. B



A

END

B

CONTACT TOYOTA CONNECT SUPPORT CENTER

3.PERFORM OPERATION (UPDATE DATA TABLE)
a.

Turn the ignition switch to ON (ACC) and wait for 1 minute.


b.

Turn the ignition switch off.


c.

Turn the ignition switch to ON (ACC) and wait for 1 minute.


d.

Check if the problem symptom recurs.


Result:
Result Proceed to
System returns to normal. A
Problem symptom recurs. B



A

END

B

CONTACT TOYOTA CONNECT SUPPORT CENTER