RM38T0EC
_59
Vehicle Exterior
_113746
DOOR / HATCH
_0510839
BACK DOOR OPENER SWITCH
G
DOOR / HATCH BACK DOOR OPENER SWITCH INSPECTION
PROCEDURE
84840G
1.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/ Smart Key System)
a.
Check the operation of the opener switch.
i.
0.833,0.25 1.167,0.5
0.333,0.25
2.49,1.313 2.656,0.563
true
2.76,0.573 2.927,1.323
true
0.188,1.375 0.5,1.531
0.313,0.156
10
false
*a
0.781,1.292 0.948,1.458
0.167,0.167
10
true
*b
0.094,0.063 0.406,0.219
0.313,0.156
10
false
*c
2.417,1.344 2.729,1.5
0.313,0.156
10
false
UL
2.896,1.344 3.208,1.5
0.313,0.156
10
false
E
0.917,0.302 1.229,0.458
0.313,0.156
10
false
U5
| *a | Not Pushed (OFF) |
| *b | Pushed (ON) |
| *c | Component without harness connected
(Back Door Opener Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition U5-3 (UL) - U5-2 (E) Back door opener switch pushed (ON) Below 1 Ω U5-3 (UL) - U5-2 (E) Back door opener switch not pushed (OFF) 10 kΩ or higher
If the result is not as specified, replace the back door opener switch assembly.
b.
0.833,0.25 1.167,0.5
0.333,0.25
2.438,1.302 2.729,0.583
true
3.125,1.302 2.823,0.583
true
0.094,0.094 0.406,0.292
0.313,0.198
10
false
*c
0.531,1.583 0.844,1.781
0.313,0.198
10
false
*a
1.156,1.479 1.469,1.677
0.313,0.198
10
true
*b
2.375,1.344 2.688,1.542
0.313,0.198
10
false
E
3.115,1.365 3.427,1.563
0.313,0.198
10
false
L
0.906,0.313 1.219,0.51
0.313,0.198
10
false
U5
| *a | Not Pushed (OFF) |
| *b | Pushed (ON) |
| *c | Component without harness connected
(Back Door Opener Switch Assembly) |
Check the operation of the back door lock switch.
i.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition U5-1 (L) - U5-2 (E) Back door lock switch pushed (ON) Below 1 Ω U5-1 (L) - U5-2 (E) Back door lock switch not pushed (OFF) 10 kΩ or higher
If the result is not as specified, replace the back door opener switch assembly.
84840G
2.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/o Smart Key System)
a.
Check the operation of the opener switch.
i.
0.833,0.25 1.167,0.5
0.333,0.25
2.406,1.313 2.656,0.563
true
2.75,0.563 3,1.313
true
0.156,1.323 0.469,1.479
0.313,0.156
10
false
*a
0.708,1.25 0.875,1.417
0.167,0.167
10
true
*b
0.083,0.063 0.396,0.219
0.313,0.156
10
false
*c
2.354,1.323 2.688,1.49
0.333,0.167
10
false
UL
2.99,1.323 3.323,1.49
0.333,0.167
10
false
E
0.906,0.313 1.24,0.479
0.333,0.167
10
false
U5
| *a | Not Pushed (OFF) |
| *b | Pushed (ON) |
| *c | Component without harness connected
(Back Door Opener Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition U5-3 (UL) - U5-2 (E) Back door opener switch pushed (ON) Below 1 Ω U5-3 (UL) - U5-2 (E) Back door opener switch not pushed (OFF) 10 kΩ or higher
If the result is not as specified, replace the back door opener switch assembly.