RM38T0EC _59 Vehicle Exterior _115107 WINDOW / GLASS _0510339 REAR POWER WINDOW SWITCH G

WINDOW / GLASS  REAR POWER WINDOW SWITCH  INSPECTION  


PROCEDURE

Hide 84810D 1.INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for LH Side)

a.

Check the resistance.

i.
B581967C04
1.01,1.823 1.427,2.073 0.417,0.25 0.531,3.104 0.688,2.688 true 0.844,3.104 0.844,2.656 true 1.302,3.146 1.167,2.667 true 1.646,3.104 1.313,2.656 true 0.396,1.906 0.708,2.063 0.313,0.156 10 false *a 1.146,1.875 1.417,2.083 0.271,0.208 10 false N3 0.135,3.042 0.552,3.208 0.417,0.167 10 false AUTO 0.698,3.094 1.115,3.26 0.417,0.167 10 false GND 1.344,3.083 1.76,3.25 0.417,0.167 10 false UP 1.688,3.031 2.208,3.24 0.521,0.208 10 false DOWN
*a Component without harness connected
(Rear Power Window Regulator Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
N3-5 (UP) - N3-7 (GND) Auto up or up position Below 100 Ω
N3-4 (DOWN) - N3-7 (GND) Auto down or down position Below 100 Ω
N3-8 (AUTO) - N3-7 (GND) Auto up or auto down position Below 100 Ω
N3-5 (UP) - N3-7 (GND) Off 10 kΩ or higher
N3-4 (DOWN) - N3-7 (GND) Off 10 kΩ or higher
N3-8 (AUTO) - N3-7 (GND) Off 10 kΩ or higher


If the result is not as specified, replace the rear power window regulator switch assembly.



Hide 84810D 2.INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for RH Side)

a.

Check the resistance.

i.
B581968C04
1.677,1.833 2.094,2.083 0.417,0.25 1.063,3.021 1.344,2.698 true 1.521,3.094 1.521,2.698 true 1.969,3.146 1.833,2.667 true 2.365,3.135 2,2.667 true 1.094,1.917 1.406,2.073 0.313,0.156 10 false *a 1.802,1.875 2.073,2.083 0.271,0.208 10 false M3 0.646,2.979 1.063,3.146 0.417,0.167 10 false AUTO 1.396,3.115 1.813,3.281 0.417,0.167 10 false GND 2.021,3.094 2.438,3.26 0.417,0.167 10 false UP 2.406,3.073 2.927,3.281 0.521,0.208 10 false DOWN
*a Component without harness connected
(Rear Power Window Regulator Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
M3-5 (UP) - M3-7 (GND) Auto up or up position Below 100 Ω
M3-4 (DOWN) - M3-7 (GND) Auto down or down position Below 100 Ω
M3-8 (AUTO) - M3-7 (GND) Auto up or auto down position Below 100 Ω
M3-5 (UP) - M3-7 (GND) Off 10 kΩ or higher
M3-4 (DOWN) - M3-7 (GND) Off 10 kΩ or higher
M3-8 (AUTO) - M3-7 (GND) Off 10 kΩ or higher


If the result is not as specified, replace the rear power window regulator switch assembly.