RM38T0EC _58 Vehicle Interior _114202 SEAT BELT _0509302 REAR SEAT INNER BELT ASSEMBLY(for LH Side) G

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for LH Side)  INSPECTION  


PROCEDURE

Hide 73480 1.INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY

a.

for LH Belt:

i.
B591118C03
1.5,0.25 1.917,0.5 0.417,0.25 1.125,1.813 1.375,1.229 true 1.729,1.813 1.563,1.229 true 0.188,0.135 0.375,0.323 0.188,0.188 10 false *a 1.573,0.313 2.031,0.51 0.458,0.198 10 false O85 0.938,1.833 1.552,2.031 0.615,0.198 10 false LBR+ 1.573,1.833 2.188,2.031 0.615,0.198 10 false LBR-
*a Component without harness connected
(Rear Seat Inner with Center Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O85-5(LBR+) - O85-4(LBR-) Rear LH seat belt unfastened Below 1 Ω
Rear LH seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner with center belt assembly.



b.

for Center Belt:

i.
B521158C03
1.5,0.167 1.917,0.417 0.417,0.25 2.219,1.688 1.969,1.104 true 1.531,1.688 1.781,1.104 true 0.156,0.104 0.385,0.313 0.229,0.208 10 false *a 1.573,0.208 2.031,0.406 0.458,0.198 10 false O86 2.083,1.698 2.698,1.896 0.615,0.198 10 false CBR+ 1.354,1.708 1.969,1.906 0.615,0.198 10 false CBR-
*a Component without harness connected
(Rear Seat Inner with Center Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O86-1(CBR+) - O86-2(CBR-) Rear center seat belt unfastened Below 1 Ω
Rear center seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner with center belt assembly.