84922C
1.INSPECT FRONT POWER SEAT SWITCH
Check the resistance.
| *a | Slide Switch (Front) |
| *b | Slide Switch (Rear) |
| *c | Lifter Switch (Up) |
| *d | Lifter Switch (Down) |
| *e | Reclining Switch (Front) |
| *f | Reclining Switch (Rear) |
| *g | Lumbar Support Switch (Hold) |
| *h | Lumbar Support Switch (Release) |
| *i | Component without harness connected
(Front Power Seat Switch) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| q7-4 - q7-6 | Slide switch pressed
(Forward) |
Below 1 Ω |
| q7-1 - q7-12 | ||
| q7-4 - q7-12 | Off | |
| q7-1 - q7-12 | ||
| q7-1 - q7-6 | Slide switch pressed
(Rearward) |
|
| q7-4 - q7-12 |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| q7-8 - q7-6 | Lifter switch pressed
(Up) |
Below 1 Ω |
| q7-10 - q7-12 | ||
| q7-10 - q7-12 | Off | |
| q7-8 - q7-12 | ||
| q7-10 - q7-6 | Lifter switch pressed
(Down) |
|
| q7-8 - q7-12 |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| q7-5 - q7-6 | Reclining switch pressed
(Forward) |
Below 1 Ω |
| q7-11 - q7-6 | ||
| q7-7 - q7-6 | ||
| q7-3 - q7-12 | ||
| q7-5 - q7-12 | Off | |
| q7-3 - q7-12 | ||
| q7-3 - q7-6 | Reclining switch pressed
(Rearward) |
|
| q7-5 - q7-12 | ||
| q7-10 - q7-6 | ||
| q7-8 - q7-6 |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| q7-9 - q7-6 | Lumbar switch pressed
(Hold) |
Below 1 Ω |
| q7-2 - q7-12 | ||
| q7-2 - q7-12 | Off | |
| q7-9 - q7-12 | ||
| q7-2 - q7-6 | Lumbar switch pressed
(Release) |
|
| q7-9 - q7-12 |
If the result is not as specified, replace the front power seat switch.