DATA LIST
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Passenger Seat Buckle Switch Status | Front passenger side seat belt buckle switch status | Set, Unset or Unknown | Set: Front passenger side seat belt fastened
Unset: Front passenger side seat belt not fastened Unknown: Data is not determined |
- |
| Passenger Seat Occupant Sensor Status | Passenger seat occupant detection sensor status | OFF, ON or Unknown | OFF: Front passenger seat not occupied
ON: Front passenger seat occupied Unknown: Data is not determined |
- |
| Rear Seat RH Buckle Switch Status | Rear RH seat belt buckle switch status | Set, Unset or Unknown | Set: Rear RH seat belt fastened
Unset: Rear RH seat belt not fastened Unknown: Data is not determined |
- |
| Rear Seat Center Buckle Switch Status | Rear center seat belt buckle switch status | Set, Unset or Unknown | Set: Rear center seat belt fastened
Unset: Rear center seat belt not fastened Unknown: Data is not determined |
- |
| Rear Seat LH Buckle Switch Status | Rear LH seat belt buckle switch status | Set, Unset or Unknown | Set: Rear LH seat belt fastened
Unset: Rear LH seat belt not fastened Unknown: Data is not determined |
- |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| RR Door Courtesy Switch Status | Rear door courtesy light switch (for RH) | Close or Open | Close: Rear door RH closed
Open: Rear door RH open |
- |
| RL Door Courtesy Switch Status | Rear door courtesy light switch (for LH) | Close or Open | Close: Rear door LH closed
Open: Rear door LH open |
- |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Driver Buckle Switch | Driver side seat belt buckle switch status | Fastened or Not Fastened | Fastened: Driver side seat belt fastened
Not Fastened: Driver side seat belt not fastened |
- |
| Rear Right Seat Buckle / Occupant Detection Warning Switch | Rear seat inner with center belt RH buckle signal | OFF or ON | OFF: Rear RH seat belt fastened
ON: Rear RH seat belt not fastened |
- |
| Rear Left Seat Buckle / Occupant Detection Warning Switch | Rear seat inner with center belt LH (for LH) buckle signal | OFF or ON | OFF: Rear LH seat belt (for LH) fastened
ON: Rear LH seat belt (for LH) not fastened |
- |
| Rear Center Seat Buckle / Occupant Detection Warning Switch | Rear seat inner with center belt LH (for center) buckle signal | OFF or ON | OFF: Rear LH seat belt (for center) fastened
ON: Rear LH seat belt (for center) not fastened |
- |
| Driver Seatbelt Warning Buzzer Function | Driver seat belt warning buzzer | OFF or ON | Customized setting displayed | - |
| Passenger Seatbelt Warning Buzzer Function | Front passenger seat belt warning buzzer | OFF or ON | Customized setting displayed | - |
| Rear Right Seatbelt Warning Buzzer Function | Rear RH seat belt warning buzzer | OFF or ON | Customized value displayed | - |
| Rear Left Seatbelt Warning Buzzer Function | Rear LH seat belt warning buzzer | OFF or ON | Customized value displayed | - |
| Rear Center Seatbelt Warning Buzzer Function | Rear center seat belt warning buzzer | OFF or ON | Customized value displayed | - |
ACTIVE TEST
Using the GTS, perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Buzzer Operation (800Hz, Vol L, W/ Damping) | Combination meter buzzer
·
Frequency: 800Hz ·
Volume: Large ·
Fading tone |
ON | - |
| Buzzer Operation (800Hz, Vol L, W/O Damping) | Combination meter buzzer
·
Frequency: 800Hz ·
Volume: Large ·
Continuous tone |
ON | - |
| Buzzer Operation (800Hz, Vol S, W/ Damping) | Combination meter buzzer
·
Frequency: 800Hz ·
Volume: Small ·
Fading tone |
ON | - |
| Buzzer Operation (800Hz, Vol S, W/O Damping) | Combination meter buzzer
·
Frequency: 800Hz ·
Volume: Small ·
Continuous tone |
ON | - |
| Driver Side Seat Belt Warning | Driver side seat belt warning light | OFF/ON | - |