CUSTOMIZE POWER BACK DOOR SYSTEM
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
Customizing with the GTS.
Enter the following menus: Customize Setting / PSD & PBD operation.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Kick Sensor Operation Function with ACC ON | Function to enable hands-free power back door operation during ACC ON. | Enable | $00:Enable,$01:Disable | Main body ECU (Multiplex network body ECU) |
| PBD SW Operating Condition Setting | Back door control switch operation | Long Press (0.8s) | $00:Short Press (0.04s),$01:Long Press (0.8s) | Multiplex network door ECU |
| PBD Buzzer Function | Status of the the power back door buzzer | ON | $00:OFF,$01:ON | Multiplex network door ECU |
| PBD Assist Close Function | Function that enables/disables the power back door assist close operation. When set to ON, the back door will close automatically when operated in the close direction manually. | ON | $00:OFF,$01:ON | Multiplex network door ECU |
| PBD Assist Open Function | Function that enables/disables the power back door assist open operation. When set to ON, the back door will open automatically when the back door opener switch assembly (open switch) is operated. | ON | $00:OFF,$01:ON | Multiplex network door ECU |
| PBD Door Unlock with One Motion Setting | Function that selects the door or doors to unlock when the back door is locked and the electrical key transmitter sub-assembly (electrical key) is pushed to operate the power back door. | ALL DOORS | $00:Back Door,$01:All Doors | Multiplex network door ECU |
| PBD Wireless Function | Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly). | ON | $00:OFF,$01:ON | Multiplex network door ECU |
| PBD Wireless One Motion Function | Wireless one motion function* | ON | $00:OFF,$01:ON | Multiplex network door ECU |
| PBD Wireless SW Setting | Wireless operation setting condition | Long Press (0.8s) | $00:1 Time Press,$01:2 Times Press,$02:Long Press (0.8s) | Multiplex network door ECU |
| PBD Kick Sensor Sensitivity Adjust | Function that changes the sensitivity of the kick sensor. | Normal | $00:Normal,$01:+1,$02:+2 | Multiplex network door ECU |
*: The settings are enabled only when "PBD Wireless Function" is set to "ON".
Customizing with the combination meter assembly
Turn the ignition switch to ON.
Enter the following menus: Settings.
Select the setting by referring to the table below.
| Display | Description | Default | Setting | Relevant ECU |
|---|---|---|---|---|
| System Settings | Function that enables or disables the power back door operation. | On | On or Off | Multiplex network door ECU |
| Kick Sensor | Function that can be used to set the hands free power back door. | On | On or Off | Multiplex network door ECU |
| Opening Adjustment | Function that can be used to set the power back door opening angle at 6 different positions. | 5 | User Setting Position, 5, 4, 3, 2 or 1 | Multiplex network door ECU |
| Volume | Function that can be used to set the power back door buzzer volume. | large | large, normal or small | Multiplex network door ECU |