RM38T0EC _54 Brake _112606 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0503316 VSC OFF SWITCH G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VSC OFF SWITCH  INSPECTION  


PROCEDURE

Hide 84970 1.INSPECT VSC OFF SWITCH (COMBINATION SWITCH ASSEMBLY)

a.
C398606C01
1.167,1.969 1.26,1.969 1.26,1.969 1.604,1.427 true 2.021,1.438 2.365,1.938 2.365,1.938 2.448,1.938 true 0.115,0.094 0.427,0.25 0.313,0.156 10 false *a 2.51,1.865 2.667,2.063 0.156,0.198 10 false E 1.031,1.885 1.24,2.104 0.208,0.219 10 false +
*a Component without harness connected
(VSC OFF Switch (Combination Switch Assembly))


Make sure that there is no looseness in the locking part and the connecting part of the connector.

OK:

The connector is securely connected.



b.

Disconnect the VSC OFF switch (combination switch assembly) connector.


c.

Check both the connector case and the terminals for deformation and corrosion.

OK:

No deformation or corrosion.



d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (+) - 5 (E) Switch pushed Below 50 Ω
7 (+) - 5 (E) Switch not pushed 10 kΩ or higher


If the result is not as specified, replace the VSC OFF switch (combination switch assembly).