☰ Toyota Frontlander☰ فهرستADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › AUTOMATIC HIGH BEAM MAIN SWITCH
RM38T0EC
_95
ADAS / AD
_112293
ADVANCED DRIVER ASSISTANCE SYSTEM
_0501096
AUTOMATIC HIGH BEAM MAIN SWITCH
G
ADVANCED DRIVER ASSISTANCE SYSTEM AUTOMATIC HIGH BEAM MAIN SWITCH INSPECTION
PROCEDURE
84153
1.INSPECT AUTO HIGH BEAM SWITCH
a.
Check the resistance.
i.
1.542,0.167 1.958,0.417
0.417,0.25
1.281,1.865 1.448,1.365
true
2.219,1.865 2.052,1.365
true
0.167,0.177 0.479,0.333
0.313,0.156
10
false
*a
1.125,1.865 1.438,2.063
0.313,0.198
10
false
+B
2.229,1.865 2.385,2.063
0.156,0.198
10
false
E
1.625,0.219 2.083,0.417
0.458,0.198
10
false
I52
| *a | Component without harness connected
(Auto High Beam Switch) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition I52-5 (+B) - I52-2 (E) Auto high beam switch off 10 kΩ or higher I52-5 (+B) - I52-2 (E) Auto high beam switch on Below 1 Ω
If the result is not as specified, replace the auto high beam switch.
b.
Check the indicator illumination.
i.
1.542,0.167 1.958,0.417
0.417,0.25
1.573,1.865 1.656,1.365
true
1.917,1.865 1.833,1.365
true
0.167,0.177 0.479,0.333
0.313,0.156
10
false
*a
1.427,1.865 2.042,2.063
0.615,0.198
10
false
AZBI
1.833,1.865 2.448,2.063
0.615,0.198
10
false
IND+
1.625,0.219 2.083,0.417
0.458,0.198
10
false
I52
| *a | Component without harness connected
(Auto High Beam Switch) |
Apply auxiliary battery voltage to the auto high beam switch and check that the switch illuminates.
- OK:
Tester Connection Specified Condition I52-3 (IND+) - Auxiliary battery positive (+)
I52-4 (AZBI) - Auxiliary battery negative (-)Switch indicator illuminates
If the result is not as specified, replace the auto high beam switch.
c.
Check the illumination.
i.
1.542,0.167 1.958,0.417
0.417,0.25
1,1.865 1.25,1.365
true
2.5,1.865 2.25,1.365
true
0.167,0.177 0.479,0.333
0.313,0.156
10
false
*a
0.75,1.865 1.365,2.063
0.615,0.198
10
false
ILL+
2.5,1.865 3.115,2.063
0.615,0.198
10
false
ILL-
1.625,0.219 2.083,0.417
0.458,0.198
10
false
I52
| *a | Component without harness connected
(Auto High Beam Switch) |
Apply auxiliary battery voltage to the auto high beam switch and check that the switch illuminates.
- OK:
Tester Connection Specified Condition I52-6 (ILL+) - Auxiliary battery positive (+)
I52-1 (ILL-) - Auxiliary battery negative (-)Switch illumination illuminates
If the result is not as specified, replace the auto high beam switch.